company name

1. 材質：陽極處理鋁合金  

2. 附屬氣缸轉動角度：可依實際需求調整，最大調整為45°  

3. 主氣缸旋轉角度：90°  

4. 耐溫：從0℃至+80℃，乾燥空氣則可承受-20℃至+80℃  

5. 進氣壓力：標準為5.6bar，最大為8.4bar  

6. 二段開關可以控制 Valve 開度為全開、中間、全關等三個位置的 Actuator。

    經由 2 個電磁閥電訊號 on/off 來進行控制。

    中間位置的開度，可在全關 ~ 45 度之間做任意的調整。

    調整後的開度可作機械性的固定，如為流量控制等使用時，可控制在一定流量並使其穩定。

 

 

1.Material: Anodized aluminum alloy  

2.Subsidiary Cylinder Rotation Angle: Adjustable according to actual needs, with a maximum adjustment of 45°  

3.Main Cylinder Rotation Angle: 90°  

4.Temperature Resistance: Operates from 0°C to +80°C, and can withstand -20°C to +80°C in dry air conditions  

5.Air Pressure: Standard is 5.6 bar, with a maximum of 8.4 bar  

6.The two-stage switch can control the valve opening to three positions: fully open, intermediate, and fully closed.

   This is managed through two solenoid valves with on/off electrical signals.

   The intermediate position opening can be freely adjusted within the range of fully closed to 45°.

   Once adjusted, the intermediate opening can be mechanically fixed, which is particularly useful for flow control applications.

   It allows for maintaining a specific and stable flow rate.